Gas fuelled Combined Heat & Power/cogeneration integrates the production of electrical power for onsite use along with the usable thermal heat, in one single, highly efficient process.
Natural gas fuelled CHP systems are still the most commonly used commercial cogeneration technologies in the UK today and are the most reliable and efficient of all CHP technologies.
CHP technology can be operated using Natural Gas, LPG or Biogas (Syngas) fuelled sources.
**STOP PRESS** As of July 2020 ALL of the Energimizer CHP units are now “H2 ready” to integrate Hydrogen fuel within the gas fuel input required on site.
Helec Limited is proud to have been operating in the UK for more than 11 years delivering CHP solutions and in 2020 we see a number of CHP manufacturers appear to struggle to compete in the UK HVAC market place with some commercial brand names having withdrawn their ranges of gas fuelled CE – CHP units and service support.
However, rest assured, here at Helec we still strive to design, size and supply a full comprehensive range of gas fuelled Combined Heat & Power solutions ranging from 7.5 kWe through multiple micro CHP sizes up to and beyond 1mWe containerised packages.
So, feel free with confidence to specify one of our quiet, energy efficient, low NOx emitting CHP models for your next project.
Rest assured Helec will match and surpass design performances in order to confidently supply, commission, maintain and service a comprehensive range of industry leading Gas fired CHP systems for your next project.
Contact us today to discuss your CHP project.
You can explore the full range of our products by clicking any of the links below. Alternatively read more about gas fuelled CHP and our services below.
Shop By Brand
Working with Helec
At Helec we can provide a complete turnkey Combined Heat & Power serviced solution bringing peace of mind to fully manage your project from start to finish including;
Installation & commissioning
Service & Maintenance
At Helec Limited we have our own manufacturing facilities so our build teams are able to construct your plant room off-site in order to reduce the need for any sensitve hot works on your project or within your premises. This helps minimise disruption to in-use active premises and decreases the time needed to provide practical completion for most buildings construction projects.
Contact Us Today to discuss your CHP project.
Why Gas Fuelled CHP ?
Gas fuelled Combined Heat & Power (CHP) Cogeneration integrates the production of electrical power along with the usable thermal heat, in one single, highly efficient process.
A CHP primarily generates electricity whilst also being able to absorb and use the thermal heat that is produced in this process.
The thermal energy is created by the engine’s water cooling jacket heating up, this is transferred away from the engine via a heat exchanger and pumped out to a thermal store, or a buffer vessel before going on to supply the buildings heating circuit, or pre heat the domestic hot water system. The returning ‘cold’ water is reheated in the engine jacket again and the process is repeated continuously whilst there is sufficient demand (see below).
This is the same principle as used by a large power station to generate electricity but is more than twice as efficient because instead of rejecting the heat to atmosphere, the CHP engine heat is transferred to the buildings services.
This contrasts with conventional ways of generating grid produced electricity where vast amounts of thermal heat is unfortunately disperced and ‘wasted’ to atmosphere.
In today’s gas fired power stations, up to two thirds of the overall energy consumed is lost in this way, often seen as a cloud of steam “waste heat” rising from power plant cooling towers, dramatically reducing the plant’s generation efficiencies (see below)
By using the ‘waste heat’, gas CHP units can reach overall efficiency ratings in excess of 80%. This compares excellently in comparison with the efficiency of gas power stations, which in the UK range between 49% and 52%. Coal-fired plant fare less well with an efficiency of around 38%. The financial benefits of a single fuelled co-generation process are also complimented by a series of environmental advantages with reduced C02 emissions being recognised by local authorities and government bodies.
Helec design and supply a comprehensive range of gas fuelled Combined Heat & Power units with ranging sizes from 7.5 kWe through multiple sizes up to 1mWe (and more)